Replace Hatch Slides (IP35)
Sunday - April 8, 2007•Views: 15970••
We had to replace the hatch slides due to cracks and broken pieces. We ordered new replacement slides from the factory. The job was a two day job with day one removal of the hatch and traveler and day two replacement of the slides and re-sealing the hatch. Thanks to Jeff (IP35 Lucille) and Raden for helping out so much! One trick learned was...replaced the two middle screws first (which are under the hatch and unreachable when the hatch is down) then slide the back onto the slides with the front lifted up off the slides. Slide the hatch forward lifting up the hatch slides and twisting the fronts into the notch of the hatch. Lower the hatch and now screw down the remaining screws.
Powered by SIMGallery from SIMBunch