Attached is a photo of a crack in the bulkhead in the bilge compartment looking aft behind the mast step of out IP 350. The crack runs across the entire divider from starboard to port, about halfway up the bulkhead. using a thin metal plate, I can penetrate the wood to the other side.
Any similar experiences, ideas for cause, etc. No idea how old this is. Have owned the boat for 2 years and this is the first time we've had the mast pulled. The panel is somewhat green below the crack but not moldy.
Should we remove and replace? Tough area to access for sure.
Thanks in advance
Lou Griffith
Annabella / TDL35063B898
