Stern rail outboard mounting bracket

More
3 years 1 month ago #7312 by Lyons
We recently purchased an IP 420 that has an outboard bracket for the backrest to one of the perch seats. A friend of ours has and IP 320 and would like to purchase the same product. Does anyone know where this is available? I cannot find any  brand name markings on it. Please see the attached picture. Perhaps it was custom made. Thank you. -Bill Lyons
Attachments:

Please Log in or Create an account to join the conversation.

More
3 years 1 month ago #7319 by MELGYVER
Replied by MELGYVER on topic Stern rail outboard mounting bracket
That looks like a plastic bracket I just bought to replace my UV damaged flaking one, but covered with a SS Plate. I think it might have been “Five Oceans” Brand. Here is the amazon title: Five Oceans FO1586 Rail-Mount Outboard Motor Bracket, Up to 80 lb and 1 inch (25.4mm) Rail Diameter, UV-Stabilized Polypropylene, Stainless Steel Hardware Included… but I got mine at a local chandlery.

Please Log in or Create an account to join the conversation.

More
3 years 1 month ago #7322 by Lyons
Replied by Lyons on topic Stern rail outboard mounting bracket
Thank you Melgyver! Please let me know if that works. On the IP 420 and IP 320 the vertical portion of the rail is at a slight angle. This product looks like it might only accommodate a 90 degree angle. But maybe there is enough wiggle room in there for it to work.

Please Log in or Create an account to join the conversation.

More
3 years 1 month ago #7323 by MELGYVER
Replied by MELGYVER on topic Stern rail outboard mounting bracket
The one I got was: “Sea-Dog Rail-Mount Motor Bracket”.
I haven’t installed yet, but found my receipt! I’ll let you know if it works on the vertical.
The following user(s) said Thank You: Lyons

Please Log in or Create an account to join the conversation.

More
3 years 1 month ago #7324 by Lyons
Replied by Lyons on topic Stern rail outboard mounting bracket
Thanks again, Melgyver!

Please Log in or Create an account to join the conversation.

More
3 years 1 month ago #7325 by LJD610
Replied by LJD610 on topic Stern rail outboard mounting bracket
I ended up building a simple outboard mount with a strong piece of teak for our 420. I using 3 stainless U bolts for rail attachment. Held up fine with 15hp outboard over many sailing miles

Please Log in or Create an account to join the conversation.

More
3 years 1 month ago #7326 by Lyons
Replied by Lyons on topic Stern rail outboard mounting bracket
Thank you!!

Please Log in or Create an account to join the conversation.

More
2 years 11 months ago #7367 by MacMcDermid
Replied by MacMcDermid on topic Stern rail outboard mounting bracket
On my IP31, I built a teak mount with U-Bolts.
On my IP37 I purchased the one shown in the attached picture. I did have to use a Dremel to modify slightly to allow for the vertical offset as you have mentioned
Attachments:

Please Log in or Create an account to join the conversation.

More
2 years 11 months ago #7368 by MacMcDermid
Replied by MacMcDermid on topic Stern rail outboard mounting bracket
Apologies, the picture does not show the brand. this one includes the brand and contact info.
Attachments:

Please Log in or Create an account to join the conversation.

More
2 years 11 months ago #7369 by MacMcDermid
Replied by MacMcDermid on topic Stern rail outboard mounting bracket
Sorry, bad picture quality.
Better Bracket. www.simplesystemmarine.com (401)245-6949

Please Log in or Create an account to join the conversation.

Time to create page: 0.260 seconds

We have 753 guests and 3 members online

Disclaimer

Sincerely,

The International IPYOA administration team.