Bullet 2 WiFi System
Friday - December 11, 2009•Views: 7084••
Here are a few pictures showing the final installation of the Bullet 2 HP Radio, omni-directional and directional panel antenna on our davits.
Both antennas are mounted to a 1" diameter piece of stainless steel tubing which is attached to our Kato Davits with jaw clamps and other fittings.
The omni antenna is mounted to the pipe using a piece of 3/4" starboard drilled through with a 1" hole saw then through mounted using the supplied mounting bracket.
The directional antenna is mounted to the pole using a rail clamp and a small piece of starboard.
Both antennas are mounted to a 1" diameter piece of stainless steel tubing which is attached to our Kato Davits with jaw clamps and other fittings.
The omni antenna is mounted to the pipe using a piece of 3/4" starboard drilled through with a 1" hole saw then through mounted using the supplied mounting bracket.
The directional antenna is mounted to the pole using a rail clamp and a small piece of starboard.
Powered by SIMGallery from SIMBunch