Replace 5 Barb Water Manifold
Sunday - May 24, 2009•Views: 6922••
We needed to replace the original 5 barb PVC water manifold with a new one in 2008 after cracks appeared in on in the pvc. Since a 5 barb manifold isn't a stock part I made it out a bunch of brass parts.
For reference: Here is a link to the other water manifold on the IP27 in the heater compartment in the back of the quarter birth. It's a 3 prong manifold tucked behind the inside, upper wall of the compartment. Failure of this part led to water in the compartment and rusting the original heater.
http://www.ipphotos.com/view_ad.asp?Ad_ID=518
For reference: Here is a link to the other water manifold on the IP27 in the heater compartment in the back of the quarter birth. It's a 3 prong manifold tucked behind the inside, upper wall of the compartment. Failure of this part led to water in the compartment and rusting the original heater.
http://www.ipphotos.com/view_ad.asp?Ad_ID=518
Powered by SIMGallery from SIMBunch