Hull
Wednesday - November 11, 2009•Views: 4719••
Barrier and Bottom Paint of Dawn Treader.
Soda blast, Sand with 80 grit, wipe down, fill small cracks and holes. Wipe down again. When hull temp was in range, apply 5 Interlux 2000 barrier coats, and 2 coats of Trinidad bottom paint. Watching time between coats and final bottom paint. 90 - 100 hours of labor, and had to wait till June for hull temp to get in painting range for barrier coat epoxy. Used handheld infrared temp probe to check hull temp.
Soda blast, Sand with 80 grit, wipe down, fill small cracks and holes. Wipe down again. When hull temp was in range, apply 5 Interlux 2000 barrier coats, and 2 coats of Trinidad bottom paint. Watching time between coats and final bottom paint. 90 - 100 hours of labor, and had to wait till June for hull temp to get in painting range for barrier coat epoxy. Used handheld infrared temp probe to check hull temp.
Powered by SIMGallery from SIMBunch