ISLAND PACKET PORT GLASS REPLACEMENT (DIY)!

Keep the paper on the butyl tape while you fold the sides over, pressing the tape firmly onto the surface of the glass… — Keep the paper on the butyl tape while you fold the sides over, pressing the tape firmly onto the surface of the glass on both sides all the way around. Here I am pressing the wrapped edges down onto the counter until flattened out and sealed. Once well stuck to the glass, test for clearance in the liner while the paper is still on…press in more on the corners or anywhere it doesn’t clear (sorry, no photo for this part as I needed two hands). Once you know the glass and tape will fit into the liner, peel off the paper. Avoid touching the exposed butyl tape by holding only the glass. As this stuff warms up it gets very sticky!

By: Jim Lawless
Added: 22 January 2022
Album: ISLAND PACKET PORT GLASS REPLACEMENT (DIY)!
Category: How to..
Views: 606

0

Comments 0

No comments yet.

Log in to write a comment.

Disclaimer

Sincerely,

The International IPYOA administration team.