Photos

Photos
Albums

Faria Euro Oil Pressure & Water Temp

Sunday - November 20, 2022Views: 384
Wanting something more proactive than the warning lights and buzzer, I added a Faria Euro Oil Pressure and Engine Temp gauge at the Engine Instrument Panel.
I will add more detailed pictures when I am back at the boat. The oil pressure sender is added to the oil damper on the side of the engine. The water temp sender is installed just above the temp warning sensor by removing an Allen Bolt. I was not able to tie directly into the existing engine electrical harness, so I ran a three-wire set to the motor area. 1. to the oil sender, 1 to the water temp sender and one to the ground bus bar. Behind the instrument cluster in the cockpit I connected a power/live feed to the ignition switch and one to the light switch. During my recent move of the boat from Deale MD to Stuart FL the temp gauge provided me an early warning that I needed to service the raw water impeller and Mixing Elbow.
Powered by SIMGallery from SIMBunch

We have 1341 guests and one member online

Disclaimer

Sincerely,

The International IPYOA administration team.