LED Lights

Stephen:
I added the 9 LED lights recommended by Bobby. I added them this spring and they fit right into the existing light fixtures. They are not cheap at $22 each!

Here is a photo album of the install and the details:
ipyoa.com/photos/62-hayden/album?albumid=143

Use 1142-PCB-xWHP9: White 9HP-LED 1142 PCB Lamp
Select color of Warm White
That is what we used.

Link here:
www.superbrightleds.com/cgi-bin/store/in...p=%2Fother_bulbs.htm

1. Scroll that page down to...PCB Series LED Lamps
2. Click the 1142 PCB tab
3. Click buy.

You are looking for this:



1142-PCB-xWHP9: White 9HP-LED 1142 PCB Lamp


12VDC 1142 Base (dual contact, single intensity, no connection to metal base) with 1-1/2 inch square circuit board
With 9 High Power White LEDs Designed for overhead lighting in boats, campers, box trucks, etc.
With 120 Degree Beam Pattern, 120 lumens, Cool White LEDs
8~30VDC (8~14VAC)
Price for each.

Hayden

Paul:
The LED lights remain in place just fine, non have fallen out now in over 8 months since installed. As for satisfaction with light level, we are more than pleased! They are brighter then expected, they are warm, and not harsh, and now we have 10 lights on at night and do mnot even think about it. We have been living aboard now for 8 months with these and I wish I had done this sooner. They are expensive but well worth it. I have 2 more fixtures I can add into then all are complete. We did not have to cut any wires, we just installed them as described with double faced tape. I would highly recommend this addition.
Photos again are here:
ipyoa.com/photos/62-hayden/album?albumid...en/album?albumid=143
Hayden